§

November 20, 2026

Duress alarms for mobile teams: wearable or workstation-based?

By @safeshift

❦

When your team works across different sites, moves between rooms, or handles late shifts alone, a fixed panic button under a desk is not much help. A worker in a stockroom, on a delivery run, or closing a retail store alone needs a way to signal trouble wherever they are. That is the gap a workplace panic button should fill, and the choice usually comes down to two approaches: a wearable device carried on the person, or a workstation-based system tied to a fixed point in the building.

Each approach has its own strengths, and the best fit depends on how your team actually moves and what kinds of security risk they face. Below we look at how they work, where each suits, and what to consider before picking one.

Wearable duress alarms

A wearable alarm is a small device worn on a lanyard, belt clip, or wristband. When the user presses a button, the device sends a duress signal - often with GPS location - to a monitoring centre or directly to emergency contacts. Some models include fall detection, so if a worker collapses and cannot press the button, an alert is still sent.

The main advantage is that the alarm stays with the worker at all times. Whether they are in a back office, a warehouse aisle, or outside the building, they can trigger it without needing to reach a fixed point. This makes wearables the natural choice for mobile workplace teams such as security guards patrolling a site, community health workers visiting homes, or retail staff covering a closing shift alone.

Duress alarms for mobile teams: wearable or workstation-based?

Because the device is always on the person, the response procedure can be faster. The worker does not have to think about where the nearest panic button is, or whether they can reach it during a break in. They press the button on their body and help is on its way.

On the downside, wearables need to be charged or have their batteries replaced regularly. A dead battery means no protection, so a routine check becomes important. Some workers may find a lanyard or belt clip uncomfortable over a full shift, and in very active roles the device could be knocked off or damaged. Training and habit-building are needed so that pressing the alarm becomes second nature when adrenaline is high.

Workstation-based panic buttons

A workstation-based system places a fixed panic button at a specific location - under a counter, next to a phone, on a wall in a staff room. When pressed, it sends an alert to a security team, a colleague, or a monitoring service. These buttons are often hardwired or connected to a local network, so they do not depend on battery life or mobile coverage.

For workers who stay in one area for most of their shift, a fixed button can be very reliable. A service station attendant, a hotel receptionist on a night shift, or a pharmacy staff member handling customers alone all know exactly where the button is. There is nothing to carry, nothing to charge, and no risk of forgetting the device at home.

However, the limitation is obvious once the worker leaves that spot. If they walk a customer to the car park, take rubbish to the bins, or check a storeroom at the back of the shop, the fixed button is out of reach. In a retail crime situation, the worker may not be able to get back to the counter to press it. A threat assessment for any mobile role should account for the places a worker might be when trouble starts.

When each option suits best

Wearables suit:

  • Teams that move between buildings, rooms, or outdoor areas during a shift.
  • Solo workers who have no colleague nearby to hear a shout or a fixed alarm.
  • Roles where the worker may be isolated for long periods, such as a lone cleaner or a field technician.
  • Environments where a fixed button could be vandalised or tampered with.
  • Any situation where the exact location of the worker matters for a fast response.

Workstation-based alarms suit:

  • Roles where the worker stays at a single point for most of the shift.
  • Sites with a strong existing security infrastructure, such as monitored CCTV or an on-site security guard.
  • Environments where mobile coverage is poor and a wearable's GPS or cellular signal may not work.
  • Workers who are not comfortable wearing a device, or where uniform or role makes a wearable impractical.

Many organisations end up using a mix. A reception desk gets a fixed button, while the security guard on patrol wears a staff safety alarm. The two systems can complement each other, covering both the static and mobile parts of the team.

Duress alarms for mobile teams: wearable or workstation-based?

What to check before choosing

Before buying any system, a realistic threat assessment is essential. Walk through each role in your team and ask: where does this person spend their time? Could they reach a fixed button from every part of their work area? How quickly would a colleague or security team respond to a duress signal? Is the worker likely to be alone or in a crowd when they need to press the alarm?

Battery life, signal range, and fall detection are all worth considering, but the most important factor is whether the worker will actually use the alarm when they need it. If a device is uncomfortable, confusing, or too slow to activate, it may as well not be there. Training and drills help, but the design of the alarm itself matters. A button that requires a long press or a two-step process to avoid false alarms can be frustrating in a real emergency. A simple, instinctive press is better.

Another factor is the response procedure. Who gets the alert? Is it a colleague, a security team, the police? How do they know where the worker is? Some systems send GPS coordinates, others send a zone or room number, and some rely on the worker giving a verbal description. The speed and accuracy of the response depend on this link, not just on the alarm itself.

For mobile teams, a wearable device that includes GPS location and direct emergency calling can shorten the gap between the duress signal and help arriving. The same technology that makes a staff safety alarm effective on the move also adds a layer of accountability: supervisors can see where alerts came from and review response times after an incident.

Practical considerations for New Zealand workplaces

In New Zealand, lone worker safety is guided by health and safety legislation, and employers have a duty to manage risks for staff working alone or in isolated areas. The choice of alarm system should be part of a broader safety plan, not a standalone purchase. Factors such as mobile coverage in rural areas, the reliability of GPS indoors, and the availability of monitoring services all affect which system will actually work when needed.

Some workplaces also need to consider the possibility of a false alarm. A wearable that is accidentally pressed while the worker is moving can waste emergency resources. Good design - recessed buttons, confirmation lights, or a short delay before the alert is sent - can reduce this without making the alarm harder to use in a real emergency.

Duress alarms for mobile teams: wearable or workstation-based?

Finally, think about the long term. A system that works well today may need to adapt as your team grows, moves to new sites, or changes its shift patterns. Wearables can be reassigned easily; fixed buttons require installation at each new location. Both have a place, and a flexible approach often works best.

Choosing between a wearable and a workstation-based workplace panic button comes down to one question: where will the worker be when they need it? Answer that honestly, and the right option becomes clear.

❧